R9,200.00 Original price was: R9,200.00.R8,280.00Current price is: R8,280.00.
A steel, closed-combustion wood-burning fireplace offering 6.8 kW of heat – perfect for heating small rooms.
The price shown is the unit price. Please contact us for an installation quotation.
The Ackerman W14 freestanding fireplace is a steel, wood-burning fireplace. This closed-combustion fireplace offers 6.8 kW of heat and is perfect for heating small rooms.
The Ackerman wood fireplace has a removable cast iron grate and is lined with firebricks. All Ackerman wood-burning fireplaces come with a 2-year warranty, and the Ackerman fireplaces for sale are the most affordable fireplaces in our range.
The Ackerman W14 freestanding fireplace is a slow-combustion fireplace that offers more than twice the heat output of an open fireplace. Closed-combustion fireplaces are highly efficient and very economical, making them a perfect heating solution: you use approximately a third of the wood compared with an open fire, and more heat is transferred back into the room instead of being lost through the flue outlet.
The first few times you light your new wood fireplace, use a half-load of wood. The paint needs to cure and the unit needs to settle. There will be a hazy smoke and a slightly unpleasant smell from excess oils burning off, so leave your windows and doors open.
Take all supplementary tools out of the ash pan.
The regulators for the primary and secondary air control must be open.
At first ignition the door must not be closed fully – do not turn the handle to the locked position. Curing paint can stick to the insulation rope, so avoid pressing the rope against the door in the first few hours.
Start the fire with a little paper and twigs, gradually adding two pieces of wood at a time and slowly raising the temperature. Do this for about 3–4 hours.
There may be some smell and even a bit of smoke as the paint cures. This will all go away by the second fire. Avoid touching the paint during this process, as it becomes extremely soft and can smudge.
Load your wood periodically with one good-sized load every hour – this is far better than adding small amounts of wood at regular intervals. Once the previous load has burnt down to glowing orange coals, spread these across the bottom of the chamber and add your new load on top.
The number of logs depends on the heat output you need and the heating capability of your fireplace: load 2 pieces of wood per hour for a 6 kW heat output. Once the new load is burning well, close the air intake controls to the point where you have a slower flame.
When starting the fire on a cold day, add 2 pieces of wood and kindling, and repeat after the first hour. Thereafter, once the room has reached a comfortable temperature, the hourly load can be reduced to maintain it.
Over-firing – when a fireplace burns too hot – can damage the fireplace itself, the chimney or even the surrounding area. It is usually caused by excessive fuel, improper airflow or venting issues. It significantly increases the risk of a chimney fire and can damage components such as the throat, baffle plate or grate.
Ackerman is a fast-growing manufacturer of heating equipment, specialising in steel and tiled freestanding stoves. Ackerman has been on the Polish market since 2010 and keeps expanding its product range based on experience and innovative technologies. The high quality and durability of its products is valued by a growing number of customers in Poland and abroad.
Since its foundation, Ackerman has worked with the biggest DIY chains in Poland and within a few years became one of the key suppliers of heating equipment. It now supplies DIY stores in countries such as Germany, the Czech Republic, Slovakia, Hungary, Romania, Bulgaria, Latvia, Estonia and Finland.
Italfire installs fireplaces. Italfire’s fireplace installations are done by our own in-house installation team. We supply and install our range of fireplaces in Cape Town and surrounding areas. Contact us for an obligation-free quotation.



