Description
Thermorossi Flam Easy Pellet Fireplace
The Thermorossi Flam Easy is a freestanding pellet fireplace with ventilation, air ducting and natural convection.
It has a rated heat output of 2.3–9.3kW and a maximum power to the hearth of 10.2kW. Thermorossi specifies a heating area of up to 84m².
The Flam Easy is a hermetically sealed pellet fireplace with an external primary air supply. Warm air can also be ducted to another area of the home. A single duct outlet can extend up to 15 metres, according to Thermorossi’s English technical specification.
The pellet fireplace features a Natural function, which allows operation using natural convection at different power levels. Its sliding cast iron top forms part of this system.
A THERMOCORE® tube heat exchanger is incorporated into the Flam Easy. The raised base also provides easier access during routine cleaning.
PelletPower® Cleaning System
Thermorossi equips the Flam Easy with a self-cleaning burner designed for extended operation. The manufacturer states that the system can operate for up to 500 hours non-stop.
The Advanced Cleaning system removes ash from the sides of the burner. Ash is then collected in the dedicated drawer.
The burner uses Incoloy 800HT alloy. It can be inspected and removed by the user for cleaning and maintenance.
Pellet Heating and Controls
The Flam Easy has a 17.4kg pellet hopper and consumes approximately 0.5–2.1kg of pellets per hour. Maximum efficiency is rated at 92%, with an A+ energy rating.
A weekly programmer provides up to three daily lighting settings. The Smart Info function provides additional operating information.
Wi-Fi technology can also be added using compatible optional accessories. Thermorossi lists iControl and Room Control among the available accessories.
Technical Specifications
| Specification | Thermorossi Flam Easy |
|---|---|
| Product type | Freestanding pellet fireplace |
| Rated heat output | 2.3–9.3kW |
| Maximum power to hearth | 10.2kW |
| Heating area | Up to 84m² |
| Maximum efficiency | 92% |
| Energy rating | A+ |
| Pellet consumption | 0.5–2.1kg/h |
| Pellet hopper capacity | 17.4kg |
| Dimensions H × W × D | 1085 × 514 × 572mm |
| Weight | 160kg |
| Warm-air ducting | Yes |
| Maximum single duct | 15m |
| Room ventilation | Yes |
| Natural convection | Yes |
| Primary air from outside | Yes |
| Weekly programmer | Yes |
| Daily lighting settings | 3 |
| Smart Info | Yes |
| Flue outlet diameter | 80mm |
| Minimum flue draught | 9Pa |
| Noise level | 36dB |
| Electrical consumption | 70–270W |
| High-temperature safety thermostat | Yes |
Heat output requirement
Calculate the heat requirement for your room using our Fireplace Heat output calculator
Select your freestanding fireplace according to the heat output needed.
Freestanding Pellet fireplaces 3-8kw (under 80m2)
Freestanding Pellet fireplaces 9-11kw (under 120m2)
Freestanding Pellet fireplaces 12kw and above (120m2+)
