Ackerman – W14 freestanding wood Fireplace 6,8kw

Original price was: R9,200.00.Current price is: R8,280.00.

A steel, closed-combustion wood-burning fireplace offering 6.8 kW of heat – perfect for heating small rooms.

A+ energy rating
6.8 kW heat output
Wood burning
74.2% efficiency

Specifications

Product type
Freestanding fireplace
Fuel type
Wood
Heat output
6.8 kW
Room size
Up to 68 m²
Heating capacity
170 m³
Efficiency
74.2%
Flue diameter
120 mm
Flue outlet
Top
Firebox material
Steel
Energy rating
A+
Weight
57 kg
CO emissions
0.1%
Dimensions (W × D × H)
430 × 770 × 430 mm

Downloads

The price shown is the unit price. Please contact us for an installation quotation.

Add product to quote

This field is for validation purposes and should be left unchanged.

Enquire about this project

This field is for validation purposes and should be left unchanged.
Name(Required)

Ackerman W14 Freestanding Wood Fireplace

The Ackerman W14 freestanding fireplace is a steel, wood-burning fireplace. This closed-combustion fireplace offers 6.8 kW of heat and is perfect for heating small rooms.

The Ackerman wood fireplace has a removable cast iron grate and is lined with firebricks. All Ackerman wood-burning fireplaces come with a 2-year warranty, and the Ackerman fireplaces for sale are the most affordable fireplaces in our range.

Slow-combustion wood-burning fireplace

The Ackerman W14 freestanding fireplace is a slow-combustion fireplace that offers more than twice the heat output of an open fireplace. Closed-combustion fireplaces are highly efficient and very economical, making them a perfect heating solution: you use approximately a third of the wood compared with an open fire, and more heat is transferred back into the room instead of being lost through the flue outlet.

Using your fireplace for the first time

The first few times you light your new wood fireplace, use a half-load of wood. The paint needs to cure and the unit needs to settle. There will be a hazy smoke and a slightly unpleasant smell from excess oils burning off, so leave your windows and doors open.

Initial ignition of the fireplace

  1. Empty the ash pan

    Take all supplementary tools out of the ash pan.

  2. Open the air controls

    The regulators for the primary and secondary air control must be open.

  3. Don’t close the door fully

    At first ignition the door must not be closed fully – do not turn the handle to the locked position. Curing paint can stick to the insulation rope, so avoid pressing the rope against the door in the first few hours.

  4. Light slowly

    Start the fire with a little paper and twigs, gradually adding two pieces of wood at a time and slowly raising the temperature. Do this for about 3–4 hours.

  5. Let the paint cure

    There may be some smell and even a bit of smoke as the paint cures. This will all go away by the second fire. Avoid touching the paint during this process, as it becomes extremely soft and can smudge.

Running your Ackerman W14 fireplace

Load your wood periodically with one good-sized load every hour – this is far better than adding small amounts of wood at regular intervals. Once the previous load has burnt down to glowing orange coals, spread these across the bottom of the chamber and add your new load on top.

The number of logs depends on the heat output you need and the heating capability of your fireplace: load 2 pieces of wood per hour for a 6 kW heat output. Once the new load is burning well, close the air intake controls to the point where you have a slower flame.

When starting the fire on a cold day, add 2 pieces of wood and kindling, and repeat after the first hour. Thereafter, once the room has reached a comfortable temperature, the hourly load can be reduced to maintain it.

Avoid over-firing your fireplace

Over-firing – when a fireplace burns too hot – can damage the fireplace itself, the chimney or even the surrounding area. It is usually caused by excessive fuel, improper airflow or venting issues. It significantly increases the risk of a chimney fire and can damage components such as the throat, baffle plate or grate.

About Ackerman

Ackerman is a fast-growing manufacturer of heating equipment, specialising in steel and tiled freestanding stoves. Ackerman has been on the Polish market since 2010 and keeps expanding its product range based on experience and innovative technologies. The high quality and durability of its products is valued by a growing number of customers in Poland and abroad.

Since its foundation, Ackerman has worked with the biggest DIY chains in Poland and within a few years became one of the key suppliers of heating equipment. It now supplies DIY stores in countries such as Germany, the Czech Republic, Slovakia, Hungary, Romania, Bulgaria, Latvia, Estonia and Finland.

Supply and installation

Italfire installs fireplaces. Italfire’s fireplace installations are done by our own in-house installation team. We supply and install our range of fireplaces in Cape Town and surrounding areas. Contact us for an obligation-free quotation.

Request a quote

Search for products