Ackerman – W5G freestanding wood Fireplace 6kw

Original price was: R8,500.00.Current price is: R7,650.00.

A steel, closed-combustion wood-burning stove with a removable cast iron grate and firebrick lining, perfect for heating small rooms.

2-year warranty
6 kW heat output
80.3% efficiency
A+ energy rating

Specifications

Product type
Freestanding fireplace
Fuel type
Wood
Heat output
6 kW
Room size
Up to 60 m²
Heating capacity
120 m³
Efficiency
80.3%
Flue diameter
150 mm
Flue outlet
Rear
Firebox material
Steel
Energy rating
A+
Grate
Cast iron, 260 × 260 mm
Weight
48 kg
CO emissions
0.097%
Dimensions (W × D × H)
280 × 400 × 870 mm

Downloads

The price shown is the unit price. Please contact us for an installation quotation.

Add product to quote

This field is for validation purposes and should be left unchanged.

Enquire about this project

This field is for validation purposes and should be left unchanged.
Name(Required)

Ackerman W5G Freestanding Wood Fireplace

The Ackerman W5G freestanding fireplace is a steel wood-burning fireplace. This closed-combustion fireplace offers a 6.8 kW heat output and is perfect for heating small rooms.

It has a removable cast iron grate and is lined with firebricks. All Ackerman wood-burning fireplaces come with a 2-year warranty, and the Ackerman fireplaces for sale are the most affordable fireplaces in our range.

Slow combustion fireplace

The Ackerman W5G is a slow combustion fireplace that offers more than twice the heat output of an open fireplace. Closed-combustion fireplaces are highly efficient and very economical, making them a perfect heating solution. You use roughly a third of the wood of an open fire, and more heat goes back into the room instead of being lost up the flue.

Using your fireplace for the first time

The first few times you light your new fireplace, use a half-load of wood. The paint needs to cure and the unit needs to settle. There will be a hazy smoke and a slightly unpleasant smell as excess oils burn off, so please leave your windows and doors open.

  1. Empty the ashpan

    Take all supplementary tools out of the ashpan.

  2. Open the air controls

    The regulators for the primary and secondary air control must be open.

  3. Leave the door ajar

    At first ignition the door must not be closed fully. Do not turn the handle to the locked position. Curing paint can stick to the insulation rope, so avoid pressing the rope against the door in the first few hours.

  4. Light slowly

    Start the fire with a little paper and twigs, gradually adding two pieces of wood at a time and slowly increasing the temperature. Do this for about 3–4 hours.

  5. Let the paint cure

    There may be some smell and even a bit of smoke at first. This will all go away by the second fire. Avoid touching the paint during this process, as it becomes extremely soft and can smudge.

Running your Ackerman W5G

  • Load one good-sized load of wood every hour rather than small amounts at regular intervals.
  • Once the previous load has burnt down to glowing orange coals, spread them across the bottom of the chamber and add the new load on top.
  • The number of logs depends on the heat output you need: load 2 pieces of wood per hour for a 6 kW heat output.
  • Once the new load is burning well, close the air intake controls to the point where you have a slower flame.
  • On a cold day, start with 2 pieces of wood and kindling and repeat after the first hour. Once the room is comfortable, reduce the hourly load to maintain the temperature.

See the Ackerman fireplace user manual and our frequently asked questions about wood-burning fireplaces. We suggest Fire Heart polish for the preservation and restoration of cast iron and steel.

Avoid over-firing your fireplace

Over-firing, where the fireplace burns too hot, can damage the fireplace itself, the chimney or even the surrounding area. It is usually caused by excessive fuel, improper airflow or venting issues. It significantly increases the risk of a chimney fire and can damage components such as the throat, baffle plate or grate.

About Ackerman

Ackerman is a fast-growing manufacturer of heating equipment, specialising in steel and tiled freestanding stoves. On the Polish market since 2010, the company keeps expanding its product range based on experience and innovative technologies, and the quality and durability of its products are valued by a growing number of customers in Poland and abroad.

Since its foundation, Ackerman has worked with the biggest DIY chains in Poland, becoming one of their key suppliers of heating equipment within a few years. It now also supplies DIY stores in Germany, the Czech Republic, Slovakia, Hungary, Romania, Bulgaria, Latvia, Estonia and Finland.

Read more about the history of fireplaces and the different types of fireplaces available.

Supply and installation

Italfire installs fireplaces. Italfire’s fireplace installations are done by our own in-house installation team. We supply and install our range of fireplaces in Cape Town and surrounding areas. Contact us for an obligation-free quotation.

Request a quote

Search for products