SKU: 100006

Ackerman – W9 Freestanding wood Fireplace 6kw

Original price was: R12,000.00.Current price is: R8,400.00.

A steel closed-combustion wood-burning stove with a removable cast iron grate and firebrick lining, ideal for heating small rooms.

2-year warranty
6 kW heat output
Wood burning
A+ energy rating

Specifications

Product type
Freestanding fireplace
Fuel type
Wood
Heat output
6 kW
Room size
Up to 60 m²
Heating capacity
120 m³
Efficiency
80.1%
Flue diameter
150 mm
Flue outlet
Rear
Firebox material
Steel
Energy rating
A+
Grate
Cast iron, 260 × 260 mm
Weight
62 kg
CO emissions
0.097%
Dimensions (W × D × H)
450 × 400 × 950 mm

Downloads

The price shown is the unit price. Please contact us for an installation quotation.

Add product to quote

This field is for validation purposes and should be left unchanged.

Enquire about this project

This field is for validation purposes and should be left unchanged.
Name(Required)

Ackerman W9 Freestanding Wood Fireplace

The Ackerman W9 freestanding fireplace is a steel wood-burning fireplace. This closed-combustion fireplace offers 6 kW of heat and is perfect for heating small rooms.

The Ackerman W9 wood fireplace has a removable cast iron grate and is lined with firebricks. All Ackerman wood-burning fireplaces come with a 2-year warranty, and the Ackerman fireplaces for sale are the cheapest fireplaces in our range.

Slow combustion fireplace

The Ackerman W9 freestanding cylindrical fireplace is a slow combustion fireplace which offers more than twice the heat output of an open fireplace. Closed-combustion fireplaces are highly efficient and very economical, making them a perfect heating solution. You use approximately a third of the wood compared to an open fire, and more heat is transferred back into the room instead of being lost through the flue outlet.

Using your fireplace for the first time?

The first few times you light your new freestanding fireplace, use a half-load of wood. The paint needs to cure and the unit needs to settle. There will be a hazy smoke and a slightly unpleasant smell from excess oils burning off, so please leave your windows and doors open.

Initial ignition of the fireplace

  1. Empty the ashpan

    Take all supplementary tools out of the ashpan.

  2. Open the air controls

    The regulators for the primary and secondary air control must be open.

  3. Leave the door ajar

    At first ignition the door must not be closed fully. Do not turn the handle to the locked position. Curing paint can stick to the insulation rope, so avoid pressing the rope against the door in the first few hours.

  4. Build the fire slowly

    Start the fire with a little paper and twigs, gradually adding two pieces of wood at a time and slowly increasing the temperature. Do this for about 3–4 hours.

  5. Let the paint cure

    There might be some smell and even a bit of smoke initially as the paint cures. This will all go away by the second fire. Avoid touching the paint during this process, as it becomes extremely soft and touching can cause smudge marks.

Running your Ackerman W9 fireplace

Control and operate your fireplace correctly by loading one good-sized load of wood every hour. This is far better than adding small amounts of wood at regular intervals.

  • Once the previous load has burnt down to glowing orange coals, spread the coals across the bottom of the chamber and add your new load on top.
  • Load 2 pieces of wood per hour for a 6 kW heat output; the number of logs depends on the heat you need.
  • Once the new load is burning well, close the air intake controls until you have a slower flame.
  • On a cold day, start with 2 pieces of wood and kindling and repeat after the first hour. Once the room is comfortable, reduce the hourly load to maintain the temperature.

Avoid over-firing

Over-firing, where a fireplace burns too hot, can damage the fireplace itself, the chimney or even the surrounding area. It is usually due to excessive fuel, improper airflow or venting issues. It significantly increases the risk of a chimney fire and can damage components such as the throat, baffle plate or grate.

About Ackerman

Ackerman is a fast-growing manufacturer of heating equipment, specialising in steel and tiled freestanding stoves. On the Polish market since 2010, they are constantly expanding their product range based on experience and innovative technologies, and the quality and durability of their products is valued by a growing number of customers in Poland and abroad.

Since their foundation they have worked with the biggest DIY chains in Poland, becoming one of the key suppliers of heating equipment within a few years. They now supply DIY stores in countries such as Germany, the Czech Republic, Slovakia, Hungary, Romania, Bulgaria, Latvia, Estonia and Finland.

Read more about the history of fireplaces and different types of fireplaces, or see our frequently asked questions about wood-burning fireplaces.

Supply and installation

Italfire’s fireplace installations are done by our own in-house installation team. We supply and install our range of fireplaces in Cape Town and surrounding areas. Contact us for an obligation-free quotation.

Request a quote

Search for products