Description

L’Artistico ORY AP 800 2F DX Corner Pellet Fireplace

The L’Artistico ORY AP 800 2F DX is a high-output corner pellet fireplace designed to provide efficient air heating while creating a wide view of the flame from two sides. With a maximum nominal thermal output of 15kW, the ORY AP 800 2F DX is designed for larger living areas and open-plan spaces, subject to the home’s insulation, layout and heating requirements.

The DX configuration features the glass panel on the right-hand side, allowing the fireplace to be positioned into a corner while providing an extended view of the fire. The rectangular combustion chamber and generous glass area make the flame a prominent feature within the room.

The ORY AP 800 2F incorporates three independent ventilation systems. Hot air can be directed into the room or ducted to other areas, providing greater flexibility when heating larger or multi-room spaces.

L’Artistico ORY AP 800 2F DX Features

The ORY AP 800 2F DX combines automated pellet heating with a range of features designed for convenient and efficient operation.

• 15kW maximum nominal thermal output
• 6.9kW minimum nominal thermal output
• 90.8–93.7% efficiency
• 60kg pellet hopper capacity
• 1.6–3.6kg/h pellet consumption
• Three independent ventilation systems
• Two independent centrifugal fans for ducting
• Front ventilation fan
• Automatic brazier cleaning
• Comflux controlled combustion-air flow
• Soft Mode for quieter operation
• Upper flue outlet
• 100mm flue connection
• Integrated inspection T
• Two-sided corner glass configuration
• Right-hand glass configuration for the SX model

Specifications are based on L’Artistico’s published technical information for the ORY AP 800 2F.

15kW Corner Pellet Fireplace for Larger Living Spaces

With a maximum nominal thermal output of 15kW, the ORY AP 800 2F DX is designed for higher-output pellet heating applications.

The fireplace can operate between approximately 6.9kW and 15kW of useful thermal output, allowing the heating performance to be adjusted according to the required conditions. Its actual heating performance will depend on factors such as room size, insulation, ceiling height, glazing and whether the home has an open-plan or divided layout.

For this reason, heat output should be considered alongside the characteristics of the installation space rather than relying on a simple square-metre calculation.

Corner Pellet Fireplace with Two-Sided Flame View

One of the key features of the ORY AP 800 2F DX is its corner configuration with two glass viewing areas.

This design allows the fire to be viewed from more than one angle. Suitable for corner installations where a conventional front-facing fireplace would provide a more limited view of the flame.

The DX version is configured with the glazed side on the right, while the corresponding DX configuration has the glass on the opposite side.

Ductable Pellet Fireplace Heating

The ORY AP 800 2F DX is designed with three independent ventilation systems, providing flexibility when distributing heated air.

A central centrifugal fan can provide air directly into the room or be configured for ducting, while two additional centrifugal fans are intended for ducting heated air to other areas. This makes the fireplace particularly interesting for larger homes where heating may need to be distributed beyond the room containing the fireplace.

Ducting arrangements must be designed and installed according to the manufacturer’s requirements, including the specified duct diameters and maximum ducting distances.

60kg Pellet Hopper

The ORY AP 800 2F has a 60kg pellet storage capacity, reducing the frequency with which pellets need to be manually added to the fireplace. Published technical data lists pellet consumption from approximately 1.6kg/h at minimum output to 3.6kg/h at maximum output, depending on operating conditions.

Actual pellet consumption and operating time will vary according to the selected heat setting, pellet quality and operating conditions.

Automatic Brazier Cleaning

The ORY AP 800 2F includes an electromechanical automatic brazier-cleaning system, helping simplify routine operation and maintenance. The fireplace also provides rapid access to the ash collection areas.

This automated cleaning function is one of the practical advantages of pellet heating compared with a traditional manually loaded wood-burning fireplace.

Comflux Combustion Control and Soft Mode

The ORY AP 800 2F includes Comflux, a system designed to control the combustion air flow. It also includes Soft Mode, which provides a quieter operating mode.

These features are designed to improve the everyday operation of the fireplace while maintaining controlled pellet combustion.

L’Artistico ORY AP 800 2F DX Installation

The ORY AP 800 2F SX is a substantial pellet fireplace and requires professional installation with the appropriate flue, combustion-air supply, ventilation and ducting arrangements where applicable.

The manufacturer’s technical documentation specifies a 100mm flue outlet and provides detailed requirements for installation, ventilation and clearances. These requirements should be followed for every installation.

Italfire can assist with fireplace selection and professional installation in South Africa.

Learn more about fireplace installation.

Why Choose the L’Artistico ORY AP 800 2F DX?

The ORY AP 800 2F SX is particularly suited to homeowners looking for:

• A high-output corner pellet fireplace
• A wide two-sided view of the flame
• Up to 15kW nominal thermal output
• A large 60kg pellet hopper
• Automated pellet feeding and brazier cleaning
• Ductable hot-air heating
• Controlled combustion
• Programmable pellet heating
• A contemporary built-in fireplace design

If you are comparing pellet heating options, explore Italfire’s full range of pellet fireplaces or view our insert pellet fireplaces.

When cleaning your L’artistico ORY AP 800 2f DX Fireplace glass we recommend you use the Ribitech Glass Cleaning spray.

View our corner fireplace range

Click here to purchase your premium wood pellets for your fireplace